Home Decoration

Lying with the old railway aluminum is very good, indeed, color Kreidung problem. Just RUB hand along the old route of the old paint and all the Cretaceous in the palm of your hand. Strives to keep the color, it poses a real problem. This is due to oxidation of the color. Siding manufacturers originally focused on the problem of “value added”. She called “self” as the color of literally washed the house.

Vinyl Siding elderly is also a problem. UV light, vinyl mask towing train over time and towing gear ugly.

Many unfortunate homeowners and contractors have the consternation when the house again, only for the new color of peeling a few months later. The two problems of aluminum and vinyl, to tow the train can be overcome with proper cleaning, surface treatment and re-painting.

Cleaning

You must rent a power washer with a minimum pressure of 3000 psi. You want a high pressure powerful enough to remove most of the old Cretaceous color towards aluminum, remove dirt and construction on the old track on vinyl.

Start at the head of the track and, of course, work your way down. You need to feel close to the wall surface area of the towing process of removing the old color. In some areas, you can see that the color comes to bare metal. Be careful near windows, corners, Soffit and doors. Water pressure may be required in these areas, the damage. You can TSP or other cleaning solutions for the reservoirs of mold, algae and dirt on others. If you have a cleaning solution, be sure to rinse it with your pressure washer. You need your house to dry for several days to dry, sunny weather before the process of painting.

If you are new or vinyl towing gear aluminum cover towing the train, you may have a surface shine. It is a solvent type on the Elimination of All shine to the surface and to support your first coat better. You have no problem finding a good shine on your Lackversorgung save.

Application

I like a sales Airless Sprayer. It is the color directly from the 5 gallons bucket color, for the tube and your pistol. They are renting to many tools and even some sites that Lackversorgung recorded delivery to the contract. If your paint is real high quality latex, are thicker than other latex color and requires a powerful Airless Sprayer.

Priming

This step is just as critical as on the stage. In fact, cleaning and surface preparation phase, or break the outcome of your project.

I am like a latex additive color EMULSION appointed liaison for the first layer. EMULSION-Bond is a bonding agent and is the first layer of color or background, to assist, in close liaison with former towing the train.

I am best latex exterior color, oil or other solvents, paints. Latex colored, for the expansion and contraction towing train very well. The high quality latex paint, I should not of substance. I linked directly to the first layer of color. Check with your provider, if the color or not a substance. In general, if in case of doubt, one of substance. If you have a background, add a link to it on the application. There are also binders for oil solvents or other colors. One type is penetrol. These are, in general, the contractor to provide a disk image.

Many entrepreneurs are on the land premium, particularly where the metal is exposed to naked. I do not know how it should be responsible, because it may seek to unequal finish. If I have a coat of substance, I prime the entire house. The result is a surface later.

Finished Coat

Topcoat is your color. You must contact your paint manufacturer to see if one or two after the finish coat. As I mentioned above, the highest quality Buy painting outdoors.

In the conclusions

Cleaning and surface preparation are the two main ingredients for a successful paint job. A binder in the first layer is also very critical to avoid the replacement color later. With these techniques, I painted housing, which lasted longer than the first plant Finish.